>What the HELL is POP3 and what’s the difference with IMAP?

What the HELL is POP3 and what’s the difference with IMAP?

email evolution, pop3 imap

It is a common question and one of the major difficulties to understand the different email protocols and how to set them up properly. Let’s try to clarify the matter.

POP3 is a protocol to download and locally store your e-mails. When your client connects it will download all mail stored in your mailbox and save it to your hard disk. It will then (by default) delete the copy that is held on our servers.

POP3 is good if you want to keep all mails you are sent as you are not limited by your mailbox quota once the mail has been downloaded or if you wish to keep local backups of your mail.

It is limited to only one connection (computer, phone or other device) at a time. In addition, once a message has been downloaded to a computer and removed from our server it can only be viewed on that computer.

IMAP4 is a protocol used to access and manipulate the contents of the mailbox on the server in real time. You can open mails, create folders to store mails, delete messages from the server and otherwise use the system as normal. The primary difference is that all messages are saved and stored on the server, not on your local computer.

IMAP4 is good if you want multiple computers or devices (such as a smart phone) to be able to see the same mailbox and messages. It also allows you to access your mails via the Webmail system when roaming.

It is limited in that your mailbox on the server has a maximum quota. You will need to manage the e-mails that you save and remove older ones or ones that are not required in order to ensure that the mailbox does not fill up and prevent you from receiving new messages.

Difference between IMAP and POP

IMAP and POP are hence two different protocols. There are many differences between these two. The main difference is that IMAP(Internet Messaged Access Protocol) always syncs with mail server so that any changes you make in your mail client (Microsoft Outlook, Thunderbird) will instantly appear on your webmail inbox.

On the other hand, in POP(Post Office Protocol), your mail client account and mail server are not synced. It means whatever changes you make to your email account in the mail client will not be transferred to the webmail inbox.

In simple terms, if you are using IMAP and mark a mail as read, it gets marked as read in your web based inbox too (because the changes are happening on the server). However, this won’t be the case if you are using POP, because the mails are downloaded to your PC and the changes won’t reflect on the server.


If that’s still not enough to explain the main differences, let’s have a more comprehensive idea about these protocols, email clients, email accounts and anything that may be involved. ( Source: Howtogeek.com )

We send a lot of email these days—at work, at home, on our phones… But do you know what all the email jargon means? Keep reading to find out more about the difference between the various ways to receive email.

Whether you use Gmail, Hotmail, Yahoo mail, or email configured on your own website—there’s more to receiving email that it might seem like on the surface. Today, we’ll be focusing on some answering some of the most common stumbling blocks when it comes to setting up new email accounts, and explaining the difference in clear language. For our geekier readers that already know that stuff, feel free to join in the discussion—let us know how you explain to relatives and tech-challenged coworkers the difference in common email setups… or simply share this guide and save yourself the trouble of explaining it!

Email Clients vs Webmail

Before we explain the different protocols used to download emails, let’s take a few minutes to understand the simpler stuff—the difference between email clients and webmail. If you’ve ever started a Gmail, Hotmail, or other email account, chances are you’ve used webmail. If you work in an office and use a program like Microsoft Outlook, Windows Live Mail, or Mozilla Thunderbird to manage your emails, you’re using an email client.

Gmail_logo500px-YahooMailLogo.svgsshot-2

Both webmail and email clients are applications for sending and receiving email, and they use similar methods for doing this. Webmail is an application that is written to be operated over the internet through a browser, usually with no downloaded applications or additional software necessary. All of the work, so to speak, is done by remote computers (i.e. servers and machines you connect to through the internet).

 

Mozilla_Thunderbird_logoOutlook_Today_-_Microsoft_OutlookMicrosoft_Outlook_Icon

Email clients are programs that are installed on local machines (i.e. your computer, or the computers in your office) to interact with remote email servers to download and send email to whomever you might care to. Some the back end work of sending email and all of the front end work of creating a user interface (what you look at to receive your email) is done on your computer with the installed application, rather than by your browser with instructions from the remote server. However, many webmail providers allow users to use email clients with their service—and here’s where it may start to get confusing. Let’s run through a quick example to explain the difference.

Gmail _UI

We sign up for a new email address with Google’s Gmail and begin sending and receiving email through the webmail service. Google is providing two things for us—a web frontend, and a mail server backend for sending and receiving the emails. We communicate with the email server backend by using the webmail frontend. Through our pointing, clicking, and typing, we’re telling the email server who we want to send email to, and what we want to say.

Thunderbird5

But, we might decide that we don’t like Google’s new look for Gmail, so we decide to switch to an email client, like the free program Thunderbird. Instead of using our web based client (Gmail’s web interface) to interact with Google’s Gmail servers (the mail server backend), we use a program installed on our computers (in this case, Thunderbird) to contact the mail server backend ourselves, and sidestep webmail altogether. Google (and other webmail providers) offer all of these products, including the web frontend and the mail server backend. You can use both of them or only the mail server backend and still be using “Gmail.” And with that confusion dispelled, let’s take a look at the common email protocols you’ll run into using email clients or mobile phones.

POP3, Post Office Protocol

4968422200_1ab99c61ef_b

POP, or Post Office Protocol, is a way of retrieving email information that dates back to a very different internet than we use today. Computers only had limited, low bandwidth access to remote computers, so engineers created POP in an effort to create a dead simple way to download copies of emails for offline reading, then remove those mails from the remote server. The first version of POP was created in 1984, with the POP2 revision created in early 1985.

POP3 is the current version of this particular style of email protocol, and still remains one of the most popular. Since POP3 creates local copies of emails and deletes the originals from the server, the emails are tied to that specific machine, and cannot be accessed via any webmail or any separate client on other computers. At least, not without doing a lot of email forwarding or porting around mailbox files.

While POP3 is based on an older model of offline email, there’s no reason to call it obsolete technology, as it does have its uses. POP4 has been proposed, and may be developed one day, although there’s not been much progress in several years.

IMAP, Internet Message Access Protocol

699490324_f24b7501be_b

IMAP was created in 1986, but seems to suit the modern day world of omnipresent, always-on internet connectivity quite well. The idea was keep users from having to be tied to a single email client, giving them the ability to read their emails as if they were “in the cloud.”

Compared to POP3, IMAP allows users to log into many different email clients or webmail interfaces and view the same emails, because the emails are kept on remote email servers until the user deletes them. In a world where we now check our email on web interfaces, email clients, and on mobile phones, IMAP has become extremely popular. It isn’t without its problems, though.

Because IMAP stores emails on a remote mail server, you’ll have a limited mailbox size depending on the settings provided by the email service. If you have huge numbers of emails you want to keep, you could run into problems sending and receiving mail when your box is full. Some users sidestep this problem by making local archived copies of emails using their email client, and then deleting them from the remote server.

Microsoft Exchange, MAPI, and Exchange ActiveSync

sshot-3

Microsoft began developing MAPI (sometimes called Messaging API) not long after IMAP and POP were first developed, although it has uses beyond simple email. Thoroughly comparing IMAP and POP to MAPI is pretty technical, and out of scope for many readers of this article. Simply put, MAPI is a way for applications and email clients to communicate with Microsoft Exchange servers, and is capable of IMAP style syncing of emails, contacts, calendars, and other features, all tied into local email clients or applications. This function of syncing emails is branded by Microsoft as “Exchange ActiveSync.” Depending on what device, phone, or client you use, this same technology might be called any of the three Microsoft products (Microsoft Exchange, MAPI, or Exchange ActiveSync), but will offer the same cloud-based email syncing as IMAP.

Because Exchange and MAPI are Microsoft products, only companies that own their own Exchange mail servers or use Windows Live Hotmail will be able to use Exchange. Many clients, including the default Android mail client and iPhone, are Exchange ActiveSync capable, giving Hotmail users IMAP style cloud-based email, despite Hotmail not offering true IMAP functionality.

Other Email Protocols

288308367_9afaa97d77_o

Yes, there are other protocols for sending, recieving, and using email, but most of us that are using plain old free webmail and mobile phones will be using one of these three major ones. Since these three technologies cover the needs of nearly all HTG readers, we won’t be spending time today talking about the others. If you have any experience using email protocols not listed here, we’re interested to hear about it—feel free to discuss them in the comments.


In Short: Which Do I Use to Set Up My Email?

Depending on your personal style of communicating and whom you prefer to get your email service from, you can pretty quickly narrow down how you should use your email.

  • If you use check your email from a lot of devices, phones, or computers, set up your email clients to use IMAP.
  • If you use mostly webmail and want your phone or iPad to sync with your webmail, use IMAP, as well.
  • If you’re using one email client on one dedicated machine (say, in your office), you might be fine with POP3.
  • If you have a huge history of email, you may want to use POP3 to keep from running out of space on the remote email server.
  • If you use Hotmail or an Exchange Server Email, MAPI or Exchange ActiveSync will give you similar cloud-based syncing, like IMAP.
  • If you don’t use Hotmail and you want email sync, use IMAP. If you do use it and want email sync, use MAPI/Exchange ActiveSync.
2017-03-22T11:34:12+00:00